Description
Ai C40 series recirculating chillers are the true thermostatic control laboratory chiller, they allow you to remove or add temperature as required by your application. This closed laboratory chiller is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C40 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
IMPORTANT! -30°C/-22°F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
C30-40 circulating chiller features
- No dry ice or liquid nitrogen needed
- Advanced PID digital temp controller
- Built-in chilling fluid filter protects the recirculating pump and prevent blockage
- All steel construction for durability
- Cost saving as the water consumption is completely eliminated
- Built-in casters for mobility
- Plug and play, no assembly required
Specifications
| Model | C30-40-50L |
| Electrical requirements | 220V 60Hz 1-PH 18A, 3960 watts |
| Compressor | Make: KK Power: 208-230V 60Hz 1-Phase Number of compressor: One Refrigerant: R404A (3.2 kgs) |
| Cooling capacity (assuming working environment is 25°C or 77°F) |
@ 32°F/0°C: 5000W @ 14°F/-10°C: 3000W @ -4°F/-20°C: 1800W @ -13°F/-25°C: 1000W |
| Reservoir | Capacity: 40 liters or 10.6 gallons Dimensions: 17.5 x 17.5 x 9.5 inches Material: Type 304 stainless steel Chilling fluid connection: 3/4″ NPT Drain port: 1/2″ NPT Overflow port: 3/8″ barb |
| Recirculating pump | Pump type: Centrifugal Model: 25PLBR30-10 Pumping speed: 8 gallon/min or 30L/min Power: 280W Pressure: 1 bar |
| Radiator | Fan motor Make: Boyoung Model: YWF4E-400 Power: 220V 60Hz 1.3A 300W Rotation speed: 1550 rpm Flow rate: 4240 m3/hour Cleaning Clean radiator fins with a fin comb every three months |
| Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
| Temperature controller | Temperature range: -30°C to ambient-5°C Accuracy: +/- 2°C Type: Digital microprocessor PID controlled Range: -30°C (-22°F) to Ambient Display unit: Celsius °C |
| Tempeature sensor type | Pt100 |
| Housing | Powder coated type 42 stainless steel |
| Recommended coolant | For 50°F/10°C or higher: distilled water. Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water |
| Built-in swivel casters | Four |
| Safety | Compressor over-heat protection Short circuit and ground protection Over-current protection Over-voltage protection |
| Unit/shipping weight | 365 lbs / 480 lbs |
| Unit/shipping dimensions | 40 x 25 x 41 inches / 46 x 30 x 51 inches (DxWxH) |
| Recommended for | Ai SolventVap 50L rotary evaporators and 20L jackted reactors |
| Download | Product brochure |
.gif)
Reviews
There are no reviews yet.