SHO Industries – Rosin Roller™ Heat Press

The Rosin Roller™ is the first rosin extractor designed specifically for large scale production. The traditional rosin press design applies pressure to dual heated plates. This causes a limitation for commercial scale production as when plates sizes increase to accommodate more material, the larger surface significantly reduces pressure. Additionally, large plate sizes cause the oil to degrade as during pressing it sits on heated plates, unable to escape.

As such we concluded early on that the key to large scale production is to create a continuous feed of small batch presses. As we developed and tested this technology, we have found not only an increase in speed of production, but a significant increase in yield per press. By pushing the oil out in one direction we are able to capture a higher percentage of essential oils.

Rosin Roller™ is built with 5 inch stainless steel rollers. Fully adjustable pressure range operating between 750LB to 2,500LB PER SQUARE INCH. Since the contact point of the rollers is a thin line, not a large plate surface we are able to achieve much higher pressure with less applied force.

Rosin Roller™ Specs:

– 5 inch stainless steel rollers

– Adjustable pressure ranging from 750LB to 2,500LB PER SQUARE INCH

– PID Controller

– Manual speed control

– The machine operates on 110V , weighs 74 LBs and measures 16 inches by 6 inches by 7 inches.

Rosin Roller™ comes with a lifetime warranty. We will supply parts free of charge. If the damage is beyond repair, we will cover the cost of shipping and send out a new machine.